EMS72-Fuel-Probe-Sensor - Electronic Monitoring Solutionz

Home 02

Sensors

EMS72 Fuel Level Measurement

EMS72 Fuel Probe is an accessory product used to monitor Diesel fuel level. It finds particular application in the Telecom and Industrial Diesel Generator where remote monitoring is employed, The probe can be cut to any length from 150mm to 3000mm. An RS485 interface with a definable address allows it to used directly on a modbus network.

OVERALL SIZE
66.6mm(D) x 1.6mm(W)

PANEL CUTOUT SIZE
Mechanical Assembly

WEIGHT
25g

PRODUCT HIGHLIGHTS
TECHNICAL SPECIFICATIONS
SIMILAR PRODUCTS

KEY FEATURES	BENEFITS
12V/24V DCpower supply	Cost associaed with communication is reduced.
EMS72 provides both isolated RS485 for communication and 4-20mA output	Provides Isolated RS485
	Improves fuel and service management.

FEATURES	SPECIFICATIONS
Overall Dimensions	66.6mm(D) x 1.6mm(W)
Mounting Hole	Mechanical Assembly
IP rating	IP30
Storage Temperature	-20°C to 85°C
Relative Humidity	95% non condensing
Operating Temperature	-20 to +60°C
Isolation	1KV between primary and secondary circuits.
Bit Rate	Maximum: 57600 BPS
Fan Out	Maximum: 32
Supply Current	Standby: 5mA@12V DC power supply Maximum: 500mA Depending on Fanout
Supply Voltage	9.3V to 36V DC Nominal 12V/24V Automotive
Common Mode Voltage Range	-7VDC to +12VDC (Accross the RS485 network)
Short Circuit Protection	Protected
Testing	Environmental Test: IEC68 Part2 EMS Compliance: EN50081-1, EN50081-2 IEC61000-4-3 Electrical safety AS 3100 and AS 3260

EMS08

EMS08