Home 02

Communication Module

   

EMS12

LOGIC to RS232 Module

EMS860EMS12
 
EMS12 is one of many different communications interfaces used with EMS controllers. It provides an RS232 inteface which can be used for direct connection to a PC or Modem for local setup or remote monitoring. The transmission distance is limited to 15 Meters. The unit is housed in a DIN Rail module and connects to the controller by a short ribbon cable.
 
OVERALL SIZE
41mm x 86mm x 40mm
 
PANEL CUTOUT SIZE
72mm Din Rail x 32mm (W)
 
WEIGHT
20g
  1. PRODUCT HIGHLIGHTS
  2. TECHNICAL SPECIFICATIONS
  3. SIMILAR PRODUCTS
KEY FEATURES
An addressable Input and Output Expansion module used with various EMS Controllers
Two communication port connectors one of which connects to the controller and the other to allow connection to a BMS or PC.
8 potential free outputs, supporting No / NC connections.
LEDs indicate the status of all the inputs, outputs, power supply and Opto-communication

FEATURES

SPECIFICATIONS

Overall Dimensions

111mm x 86mm x 30mm

Mounting Hole

Din Rail 72mm Series. 32mm rail

IP Rating

IP30

Supply Voltage

9.5V to 36V DC, Nominal 12V/24V Automotive

Operating Temperature

-20 to 60°C

Relative Humidity

95% non-condensing

Input Reference

0 Volts

Storage Temperature

-20 to 85°C

I/O function set-up and Adjustment

IO assignment are contained within the Master controller

Supply Current

Standby <9mA@12V DC power supply <13mA@24V DC power supply
Full function 500mA Depending on I/O activations.

Terminations

Strip length: 6-7 mm
Wire range: 24-12 AWG, 0.5 to 2.5mm

Testing

Environmental Tests: IEC68 Part2
EMC Compliance: EN50081-1, EN50081-2, IEC6100-4-3
Electrical Safety AS 3100 and AS 3260