joomla slideshow with caption

Remote Monitoring Solutions

     
     
 

EMS30

SNMP ADAPTER

EMS30 is one of many different communications interface used with EMS controllers. It provides Ethernet SNMP connectivity which can be used for direct connection to a Local Area Network for remote monitoring. The unit is housed in a DIN Rail Module and connects to the controller by a short ribbon cable.

Learn more

     

  
     
 EMS339  

EMS339

Fuel Optimiser Unit

EMS339 controller is specifically designed for Telecom applications which minimises Diesel Fuel consumption by delaying the DG start, after a Mains Failure. The DG will start and stop on a demand basis governed by the Room Temperature and Battery requirements. The unit can be setup to monitors the mains directly or detect a mains failure from a digital input. The unit provides 3 outputs for system control or information. Alarms and Warnings are shown on the LCD and supplemented by the Alarm output. The unit maintains 4 independent hour meters: Total Operational Hours, Mains Hours, Battery Hours and DG Run Hours.

Learn more

     

  
     
 EMS700  

EMS700

Data Logger

The EMS700 datalogger is a communication device which is intended to monitor ELTRAC (Single phase / Multi phase AC meter) meters, site security, and other critical conditions. It gets all this information from ELTRAC meters through RS485 communication. It also has the ability to transfer this data to Remote server on request.

Learn more

     

  
     
 EMS702  

EMS702

Street light controller & event logger

The EMS702 is a Street Light Controller & Event Logger. The unit is intended to monitor the Mains Power conditions, site security, and has an output to control the street light. The unit logs AMF reasons: 3 phase volts and amps, netural amps, frequency, 3 phase KW, KWH, PF, schedule for current month, On/Off hours and minutes. The collected data is automatically transferred to central server via GPRS connectivity, where warnings and alarms can be actioned, and site performance data is collated and analysed for reporting purposes.

Learn more

     

  
     
 EMS840  

EMS840

Remote Monitoring System

EMS840 Remote Monitoring System (RMS) is a data logger and communications device which allows widely distributed celluar sites to be monitored. The unit is intended to monitor on site power sources, including Mains Power conditions, Diesel Generator performance, site security, and other critical site conditions. The collected data is automatically transferred to a central server via GPRS connectivity, where warnings and alarms can be actioned, and site performance data is collated and analysed for reporting purposes.

Learn more

     

     

Manual & Auto Start Controllers

   

EMS339

Fuel Optimiser Unit

EMS339
 
EMS339 Controller is specifically designed for Telecom applications which minimises Diesel Fuel consumption by delaying the DG start, after a Mains Failure. The DG will start and stop on a demand basis governed by the Room Temperature and Battery requirements. The unit can be setup to minitor the mains directly or detect a mains failure from a digital input. The unit provides 3 outputs for system control or information. Alarms and Warning are shown on the LCD and supplemented by the Alarm output.The unit maintains 4 independent hour meters: Total Operational Hours, Mains Hours, Battery Hours and DG Run Hours.
 
OVERALL SIZE
100mm x 120mm x 60mm
 
PANEL CUTOUT SIZE
92mm x 92mm
 
WEIGHT
125g

Remote Monitoring Solutions

   

EMS700

DataLogger

EMS700
 
The EMS700 data logger is a communication device which is intended to monitor ELTRAC (Single Phase / Multi Phase AC Meter) meters, site security, and other critical conditions. It gets all this information from ELTRAC meters through RS485 communication. It also has the ability to transfer this data to Remote server on request.
 
The collected data is then used to monitor and action, alarms and log these alarms in an internal memory.
 
OVERALL SIZE
180mm x 126mm x 51mm
 
PANEL CUTOUT SIZE
155mm x 117mm
 
WEIGHT
270g

Remote Monitoring Solutions

   

EMS840

Remote Monitoring System

EMS860
EMS840
 
EMS840 Remote Monitoring System (RMS) is a data logger and communications device which allows widely distributed cellular sites to be monitored. The unit is intended to monitor on site power sources, including Mains Power conditions, Diesel Generator performance, site security, and other critical site conditions. The collected data is automatically tranferred to a central sever via GPRS connectivity, where warnings and alarms can be actioned, and site performance data is collated and analysed for reporting purposes.
 
OVERALL SIZE
180mm x 126mm x 51mm
 
PANEL CUTOUT SIZE
155mm x 117mm
 
WEIGHT
270g

Remote Monitoring Solutions

   

EMS702

Street Light Controller & Event Logger

EMS702
 
The EMS702 is a street Light Controller and Event Logger. The unit is intended to monitor the Mains Power conditions, site security, and has an output to control the street light. The unit logs AMF reasons: 3 phase volts and amps, netural amps, frequency, 3 phase KW, KWH, PF, schedule for current month, On/Off hours and minutes. The collected data is automatically transferred to central sever via GPRS connectivity, where warnings and alarms can be actioned, and site performance data is collated and analysed for reporting purposes.The street lights can be turn on/off via the SMS.
 
 
OVERALL SIZE
180mm x 126mm x 51mm
 
PANEL CUTOUT SIZE
155mm x 117mm
 
WEIGHT
270g