Remote Monitoring Solutions |
||
|
EMS702 Street Light Controller & Event Logger |
 |
|
|
The EMS702 is a street Light Controller and Event Logger. The unit is intended to monitor the Mains Power conditions, site security, and has an output to control the street light. The unit logs AMF reasons: 3 phase volts and amps, netural amps, frequency, 3 phase KW, KWH, PF, schedule for current month, On/Off hours and minutes. The collected data is automatically transferred to central sever via GPRS connectivity, where warnings and alarms can be actioned, and site performance data is collated and analysed for reporting purposes.The street lights can be turn on/off via the SMS.
|
||
| OVERALL SIZE | ||
| 180mm x 126mm x 51mm | ||
| PANEL CUTOUT SIZE | ||
| 155mm x 117mm | ||
| WEIGHT | ||
| 270g | ||
- PRODUCT HIGHLIGHTS
- TECHNICAL SPECIFICATIONS
- SIMILAR PRODUCTS
- EXPANSION MODULES
| KEY FEATURES | BENEFITS |
| Data logger and communications device | Provides comprehensive real time knowledge of thenetwork supporting infrastructure. |
| It intended to minitor the Mains Power conditions, site security and has an output to control the street lights. | Improves fuel and service management. |
| User can schedule the street light On/Off time using central server via GPRS connectivity | Provides immediate knowledge of infrastructure failure to ensure maximum availability. |
| Collected data is automatically transferred to a central server via GPRS Connectivity | Improves network reliability. |
| Provides automatic SMS messages to local service providers in the event of site failure. | |
| Reduce network operating costs. |
FEATURE |
SPECIFICATION |
Overall Dimensions |
180 x 126 x 51mm |
Mounting Hole |
155 x 117mm |
IP rating |
IP56 front, IP20 rear |
Supply Voltage |
8 V to 36V DC Nominal Automotive |
Operating Temperature |
-20 to +70°C |
Storage Temperature |
-20 to +70°C |
Relative Humidity |
95% non-condensing |
Supply Current |
Standby < 10mA Running 70mA |
AC Voltage Range |
L-N = 350VRMS. |
AC Frequency Range |
40 – 70Hz |
CT current range |
0 – 5A + 25% Overload |
Overall Accuracy |
Class 1 |
Digital Output Rating |
Open Drain Relay Coil Driver. 300mA 362VDC max. Short Circuit protected. |
Digital Input Rating |
Opto-coupler isolated. Whetting current 10mA at 12 V DC. DC input protection for +/- 30V DC Transient Protected. |
Analog Input Rating |
Current limited outputs approx. 15mA or less as required by sensors/ Short circuit and reverse voltage protected. |
Input Reference |
0V Common |
Displayed Speed Range |
0 – 4000 RPM |
Engine Hours |
0 – 99999.9 Hours |
Kilo Watt Hours |
0 – 999999.9 KWH |
Oil Pressure Sensor Type |
Switch: Close on fault Resistive 10 to 180 Ohms (VDO/Datcon) |
Oil Pressure Range |
500, 750, 1000 KPa |
Engine Temperature Sensor Type |
Switch: Close on fault Resistive (NTC) |
Engine Temperature Range |
VDO 120ºC, VDO 150ºC, VDO 200ºC |
Canopy Temperature Sensor Type |
Switch: Close on fault Resistive (NTC) |
Canopy Temperature Range |
EMS08 0-100 ºC |
Oil Temperature |
Switch: Close on fault Resistive (NTC) |
Oil Temperature Range |
40ºC-150ºC |
Fuel Level Sensor Type |
Switch: Close to fault Resistive 0 to 90 Ohms Resistive 10 to 180 Ohms Resistive 180 to 10 Ohms |
Battery Volts Measurement |
8 to 36 Volts |
Set-up and Adjustment |
All features may be adjusted using set-up buttons and LCD menu or via a PC Windows based utility |
Terminations |
Amp DUAC / Molex Mini Fit JNR |
Testing |
Environmental Tests: IEC68 Part2 EMC Compliance: EN50081-1, EN50081-2, IEC6100-4-3 Electrical Safety AS 3100 and AS 3260 |
EMS08
EMS12
EMS18
EMS20
EMS23
EMS24
EMS72
EMS315
EMS930
EMS931