Remote Monitoring Solutions |
||
|
EMS700 DataLogger |
 |
|
|
The EMS700 data logger is a communication device which is intended to monitor ELTRAC (Single Phase / Multi Phase AC Meter) meters, site security, and other critical conditions. It gets all this information from ELTRAC meters through RS485 communication. It also has the ability to transfer this data to Remote server on request.
|
||
| The collected data is then used to monitor and action, alarms and log these alarms in an internal memory. | ||
| OVERALL SIZE | ||
| 180mm x 126mm x 51mm | ||
| PANEL CUTOUT SIZE | ||
| 155mm x 117mm | ||
| WEIGHT | ||
| 270g | ||
- PRODUCT HIGHLIGHTS
- TECHNICAL SPECIFICATIONS
- SIMILAR PRODUCTS
- EXPANSION MODULES
| KEY FEATURES | BENEFITS |
| Data logger and communications device | Provides comprehensive real time knowledge of thenetwork supporting infrastructure. |
| Intended to monitor on site power sources, including Mains Power conditions, Diesel Generator performance, site security, and other critical site conditions. | Improves fuel and service management. |
| Collected data is automatically transferred to a central server via GPRS Connectivity | Provides immediate knowledge of infrastructure failure to ensure maximum availability. |
| Improves fuel and service management | Improves network reliability. |
| Improves network reliability | Provides automatic SMS messages to local service providers in the event of site failure. |
| Reduce network operating costs. |
FEATURE |
SPECIFICATIONS |
Overall Dimensions |
180 x 126 x 51mm |
Mounting Hole |
155 x 117mm |
IP rating |
IP56 front, IP20 rear |
Supply Voltage |
8 V to 36V DC Nominal Automotive |
Operating Temperature |
-20 to +70°C |
Storage Temperature |
-20 to +70°C |
Relative Humidity |
95% non-condensing |
Supply Current |
Standby < 10mA Running 70mA |
AC Voltage Range |
L-N = 350VRMS. |
AC Frequency Range |
40 – 70Hz |
CT current range |
0 – 5A + 25% Overload |
Overall Accuracy |
Class 1 |
Digital Output Rating |
Open Drain Relay Coil Driver. 300mA 362VDC max. Short Circuit protected. |
Digital Input Rating |
Opto-coupler isolated. Whetting current 10mA at 12 V DC. DC input protection for +/- 30V DC Transient Protected. |
Analog Input Rating |
Current limited outputs approx 15mA or less as required by sensors/ Short circuit and reverse voltage protected. |
Input Reference |
0V Common |
Displayed Speed Range |
0 – 4000 RPM |
Engine Hours |
0 – 99999.9 Hours |
Kilo Watt Hours |
0 – 999999.9 KWH |
Oil Pressure Sensor Type |
Switch: Close on fault Resistive 10 to 180 Ohms (VDO/Datcon) |
Oil Pressure Range |
500, 750, 1000 KPa |
Engine Temperature Sensor Type |
Switch: Close on fault Resistive (NTC) |
Engine Temperature Range |
VDO 120ºC, VDO 150ºC, VDO 200ºC |
Canopy Temperature Sensor Type |
Switch: Close on fault Resistive (NTC) |
Canopy Temperature Range |
EMS08 0-100 ºC |
Oil Temperature |
Switch: Close on fault Resistive (NTC) |
Oil Temperature Range |
40ºC-150ºC |
Fuel Level Sensor Type |
Switch: Close to fault Resistive 0 to 90 Ohms Resistive 10 to 180 Ohms Resistive 180 to 10 Ohms |
Battery Volts Measurement |
8 to 36 Volts |
Set-up and Adjustment |
All features may be adjusted using set-up buttons and LCD menu or via a PC Windows based utility |
Terminations |
Amp DUAC / Molex Mini Fit JNR |
Testing |
Environmental Tests: IEC68 Part2 EMC Compliance: EN50081-1, EN50081-2, IEC6100-4-3 Electrical Safety AS 3100 and AS 3260 |
EMS08
EMS12
EMS18
EMS20
EMS23
EMS24
EMS72
EMS315
EMS930
EMS931