EMS324-GCU-Manual-auto - Electronic Monitoring Solutionz

Home 02

Manual & Auto Start Controllers

EMS324 Genset Controller Unit

EMS324 is diesel generator controller designed for small gensets(3.5KVA - 12.5KVA) sold in the private market segment. The unit incorporates key switch initiated start and stop sequencing, monitors engine and alternator operating parameters and provides both engine and alternator protection in a single integrated package. The Genset operating parameters are shown in sequence on a four character seven segment LED display. Separate LEDs indicate which parameter is currently being shown. Alarms and Warnings are indicated on the seven segment display using Error Codes, which are printed on the Front Label.

The unit provides monitoring of the Engine and Generator operating parameters and provides automatic shutdown of the set in the event of damaging conditions.

OVERALL SIZE
96mm x 96mm x 28mm

PANEL CUTOUT SIZE


WEIGHT

PRODUCT HIGHLIGHTS
TECHNICAL SPECIFICATIONS
SIMILAR PRODUCTS
EXPANSION MODULES

KEY FEATURES	BENEFITS
The unit incorporates key switch initiated start and stop sequencing.	Reduces system cost
Monitors engine and alternator operating parameters	Integrates engine gauges and AC metering into one unit.
LED display to show the operating parameters of the genset	No need of external Current Transformer, as it has on-board CT (0-60A).
Immediate alarm sensing and display	Minimizes control panel wiring offering reduced material and labour costs.
Automatic shutdown of the genset in event of damaging conditions.	Reduces warranty costs by providing comprehensive engine and generator protection.
The unit monitos oil pressure, fuel level, and engine temperature to provide protection.

FEATURES	SPECIFICATIONS
Overall Dimensions	96 x 96mm(Bezel) x 28mm behind bezel
IP rating	IP51 front, IP20 rear
Supply Voltage	8V to 16V DC
Operating Temperature	-20 to +70°C
Storage Temperature	-20 to + 70 °C
Relative Humidity	95% non-condensing
CT current Range	0 - 60A
Supply Current	Standby <7mA Running=50mA
AC Voltage Range	L-N Max 300VRMS
AC Frequency Range	40 - 70Hz
Overall Accuracy	Class 1
Digital Output	Open Drain Replay Coil Driver. 300mA 36VDC max.
Input Reference	0V Common
Displayed Speed Range	0 - 1500 RPM
Engine Hours	0 - 99999.9 Hours
Engine Sensor Type	Switch: Close to common on fault
Termination	-Molex Mini Fit JNR
Testing	Enviromental Tests: IEC68 Part2 EMC Compliance: EN50081-1, EN50081-2, IEC6100-4-3 Electrical Safety AS 3100 and AS 3260

EMS39	EMS326	EMS361	EMS362

EMS363	EMS371	EMS353	EMS860

EMS08	EMS12	EMS18	EMS20	EMS23	EMS24
EMS30	EMS72	EMS315	EMS930	EMS931